Network Emulation - Interfacing with external PCs/Devices
To do this, the NetSim emulation component is required. If this component is available then please see http://tetcos.com/emulator.html on how this work...
Sat, 4 Apr, 2020 at 11:28 AM
Ping in emulation takes only one direction delay if you have set only one application with Ping Source IP and ping Destination IP. This is because PING is a...
Thu, 19 Aug, 2021 at 2:48 PM
Applicable Versions NetSim Standard NetSim Pro Note: The following explanation is provided assuming that you have performed all necessary configurations ...
Thu, 19 Aug, 2021 at 2:46 PM
To start off, you can have three PCs in your lab with PC1 running the application server, while PC3 runs the app client. In-between is PC2 where NetSim emula...
Wed, 18 Oct, 2017 at 10:56 AM
Yes, the virtual-real node mapping in NetSim emulator is IP based. Virtual interfaces will also work but you need to configure your application/OS IP pro...
Thu, 19 Oct, 2017 at 10:53 AM
Please first read through the following articles: https://tetcos.freshdesk.com/solution/articles/14000065572-how-does-an-emulation-application-in-netsim...
Tue, 23 Jun, 2020 at 11:42 AM
Introduction The Raspberry Pi is a series of small single-board computers developed by the Raspberry Pi Foundation to promote lab experimentation on bas...
Wed, 11 Oct, 2023 at 2:46 PM
Applicable Versions NetSim Standard NetSim Pro Any real traffic irrespective of whether it's a video, audio, or file transfer, can be se...
Thu, 19 Aug, 2021 at 2:25 PM
It is impossible to port the protocol code written for a network simulator/emulator directly into hardware. This is true of all network simulators. There ar...
Mon, 12 Sep, 2022 at 9:06 AM
Applicable for NetSim Pro and NetSim Standard. For more information on NetSim visit: https://tetcos.com/ Applicable Releases v10 v11 v12 v13 ...
Sun, 12 Feb, 2023 at 6:40 AM