5G NR mmWave
Detailed Q & A on NetSim's 5G NR mmWave Simulation Library
The band can be selected in gNB properties Set the Phy layer -> CA-Type as Single_Band and then select the CA configuration as n78,
Sun, 9 Aug, 2020 at 9:00 PM
The height of the gNB is a user defined value. When the chosen scenario is Urban Macro , the height of the gNB that a user would typically enter is 25m, wh...
Fri, 24 Jul, 2020 at 7:01 AM
The O2I Models such as Low Loss and High Loss are associated with the type of material used in the buildings and is used to calculate the penetration loss i...
Wed, 22 Jul, 2020 at 3:18 PM
Applicable Versions NetSim Standard NetSim Pro Applicable Releases v12 The scheduling algorithms will have a significant impact on the throu...
Thu, 16 Jul, 2020 at 6:39 PM
Applicable Versions NetSim Standard NetSim Pro Applicable Releases v12 If you have enabled shadow fading then you will see a variation in path l...
Thu, 16 Jul, 2020 at 6:38 PM
TS 38.901 currently does not have information related to rain fading. As and when the standards incorporate a rain fade formula, we intend to implement it...
Thu, 16 Jul, 2020 at 6:37 PM
Applicable Versions NetSim Standard NetSim Pro Applicable Releases v12 NetSim uses 'buildings' to differentiate between indoor an...
Thu, 16 Jul, 2020 at 6:36 PM
The CQI MCS is set for each gNB-UE pair separately for UL and DL. This can be seen in the ltenr.log file available in the Results Window under Log files ...
Fri, 12 Jun, 2020 at 7:40 PM
Right click on the gNB -> Properties -> Interface LTE_NR -> Scroll all the way down and you would see the channel model information
Fri, 12 Jun, 2020 at 7:38 PM
Applicable Versions NetSim Standard NetSim Pro Applicable Releases v12 The link rate adapts based on the SNR. From SNR, Eb / N0 is got by co...
Fri, 12 Jun, 2020 at 7:37 PM